Conditions of use and routine maintenance of the straight-arm aerial working platform

Requirements of the site
First of all, we should make sure that the ground capacity, the width of the road, there are no high-voltage lines and other insecurity factors around.

Requirements for the type of vehicle to be used
① Measure the vertical height and span (span refers to the straight-line distance between the vehicle operating position and the ground of the working position)
② due to straight-arm aerial working platform model difference leads to different working radius, to communicate well in advance, such as fixed work and large area work using different vehicles will lead to different work efficiency.

Routine maintenance:
1.regular maintenance to see straight-arm aerial working platform brake system, hydraulic system, check the lift. Brake is the first big guarantee of vehicle safety, when the parking brake system must be opened (and in front and rear of the vehicle, placed safety warning signs), the hydraulic system includes, hydraulic oil tank and each high-pressure oil pipe, check whether the lack of hydraulic oil, according to the hydraulic oil tank of the oil plane position to judge, high-pressure oil pipe to check whether the aging, because the oil pipe is exposed to the outside for a long time, it is easy to aging, once the aging is likely to occur, the High-pressure oil pipe burst pear will occur lift suddenly drop, triggering unnecessary danger! And check straight-arm aerial working platform each movable joint link situation, there are loose need to use tools to tighten. Some nuts can use anti-loosening agent.

2.personnel safety equipment, communication and gestures
Operators must wear safety clothing, equipment, and to ensure that the upper and lower personnel have good communication equipment and gestures (many operators due to the operation of the height of the bottom, afraid of the trouble of not wearing safety clothing, equipment, which is the most basic safety knowledge of the safety of working at height!) Up and down the operator must have good communication skills, there are conditions for the equipment and communication equipment, such as walkie-talkies, or gestures, working at height is very careful work each action can cause irreparable accidents.

3.the safe operation of the elevator
In high-rise buildings, air pressure lines, trees, operating aerial work, pay attention to straight-arm aerial working platform to maintain a safe distance, in the case of must not be close to, there must be more than one person to observe the surrounding situation, we maintain good communication, and lose loose the crowd of onlookers.